*When using TruCut Sanding Pads reduce sanding time buy 30%

Polish Your Ball Inc.

​​​

1000-grit Factory Finish*
1. 500-grit Abralon® – Sand for 30 seconds on all four sides.
2. 1000-grit Abralon – Sand  for 20 seconds on all four sides.

2000-grit Factory Finish*
1. 500-grit Abralon® – Sand for 30 seconds on all four sides.
2. 2000-grit Abralon – Sand for 20 seconds on all four sides.

3000-grit Factory Finish*
1. 500-grit Abralon® – Sand for 30 seconds on all four sides.
2. 3000-grit Abralon – Sand for 20 seconds on all four sides.

4000-grit Factory Finish*
1. 500-grit Abralon® – Sand for 30 seconds on all four sides.
2. 2000-grit Abralon – Sand for 20 seconds on all four sides.
3. 4000-grit Abralon – Sand for 20 seconds on all four sides.

4K-Fast (Replaces the 1500-grit Polished Factory Finish)

1. 360-grit Abralon -  Sand for 15 seconds on all four sides.

2. 500-grit Abralon -  Sand for 15 seconds on all four sides.

3. 1000-grit Abralon – Sand for 15 seconds on all four sides.
4. 2000-grit Abralon – Sand for 15 seconds on all four sides.

5. 4000-grit Abralon – Sand for 15 seconds on all four sides.

Reacta Gloss Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.

2. 2000-grit Abralon - Sand for 15 seconds on all four sides.

3. 4000-grit Abralon - Sand for 15 seconds on all four sides.

4. Storm Reacta Gloss Polish for 15 seconds on all four sides.

1500-grit Polished Factory Finish
1. 500-grit Abralon® – Sand for 30 seconds on all four sides.
2. 1000-grit Abralon – Sand for 20 seconds on all four sides.
3. 2000-grit Abralon – Sand for 20 seconds on all four sides.
4. 4000-grit Abralon – Sand for 20 seconds on all four sides.
5. Storm® Reacta Shine – Polish for 15 seconds on all four sides.

​

3500 grit Polished Factory Finish

1. 500-grit Abralon - Sand for 15 seconds on all four sides.

2. 1000-grit Abralon - Sand for 20 seconds on all four sides.

3. 2000-grit Abralon - Sand for 25 seconds on all four sides.

4. 4000-grit Abralon - Sand for 30 seconds on all four sides.

​5. Storm Xtra Shine -- for 15 seconds on all four sides.

​

                  Motiv Factory Resurfacing

1000-grit LSS Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides. (X 2)

2. 1000-grit Abralon - Sand for 20 seconds on all four sides.

2000-grit LSS Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.

2. 1000- grit Abralon - Sand for 20 seconds on all for sides.

​3. 1500- grit SiaAir - Sand for 20 seconds on all four sides. (X 2)

3000-grit LSS Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.
2. 1000- grit Abralon - Sand for 20 seconds on all for sides.
​3. 3000- grit SiaAir - Sand for 20 seconds on all four sides.

​4000-grit LSS Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.
2. 1000- grit Abralon - Sand for 20 seconds on all for sides.
3. 2000- grit SiaAir - Sand for 20 second on all four sides.

4. 4000-grit Abralon - Sand for 20 second on all four sides.

5000-grit LSS Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.

2. 1000-grit Abralon - Sand for 20 seconds on all four sides.

3. 2000-grit Abralon - Sand for 20 seconds on all four sides.

​4. 4000-grit Abralon - Sand for 20 seconds on all four sides (X 2)

5000-grit LSP Factory Finish

1. 500-grit Abralon - Sand for 30 seconds on all four sides.
2. 1000- grit Abralon - Sand for 20 seconds on all for sides.
3. 2000- grit SiaAir - Sand for 20 second on all four sides.

4. Polish Two Times on all four sides.

5500- grit LSP Factory Finish 

1. 500-grit Abralon - Sand for 30 seconds on all four sides.
2. 1000- grit Abralon - Sand for 20 seconds on all for sides.
3. 2000- grit SiaAir - Sand for 20 second on all four sides.

4. 4000- grit Abralon - Sand for 20 seconds on all four sides. (X 2)

5. Polish on all four sides.

​​*Any other OOB finish listed as Factory Finish can be achieved by 

sanding with the first grit listed for 30 seconds on all four sides and

for 10 seconds on the other listed grits. 

​

​

​*For Polished Finish apply polish after last step with polish recommended by Ball Manufacturer or to your "Own-Ball-Finish."

Return to Home

Recommended Resurfacing Techniques

​That will bring your Ball back to Factory Finish